Search the Community
Showing results for '{q}'.
Found 1,000 results
-
i cant find any reference to this. what is it for?
-
Orbx TrueEarth Great Britain South Released for Prepar3D v4
Nyxx replied to eaim's topic in The Prepar3d Forum
Q: Are you surprised? You shouldn't be. Perfect. 🙂 -
Throttletek offers a Dash 8 Throttle. https://throttletek.com/dash-q-400-throttle/ I have an A320 Cockpit with Skalarki parts and can really recommend them. They are very reliable. Mike
-
I had that issue too, only after v4.4 update. "Q" was absolutely not helpfull 😉
-
Q400 Warthog Config
polosim replied to Radial9's topic in Hardware Controllers | Joysticks | Drivers
This would be the perfect complement to your Q400 http://throttletek.com/dash-q-400-throttle/ Just wonderful. -
Q. Do the PFD and ND have a 2D popup? Thank you.
-
My first thought was to hit the Q key twice. It's an simism that's been around as long as I can remember... some sounds get stuck on for whatever reason.
-
Hi Rick: Let me Google that for you: http://lmgtfy.com/?q=makerunways
-
FCOM 11.31.27 Basically, Q-CLB is a reduced thrust climb that is a VNAV pitch mode. I read somewhere that the thrust is reduced to allow a 2% climb. The key to using it is to ensure you have armed VNAV before selecting Q-CLB. Hope this helps.
-
Flight Sim Seat/platform rig. UK / NW area.
MarkJHarris replied to MarkJHarris's topic in Classified Ads | Want Ads | Swap Meet
68 views but not a single comment. Q. Is this any use to anyone? I'll advertise it as a general gaming seat rig as it works equally well on playstation or other driving games too. ~NOW ASKING £300 ONLY. -
I'm a little late to the party, only been around since v1.5. So maybe this has already been discussed. Put it under "Be the first on your block with 'em." Link cuz they're probably copyrighted. Look at N789JC... https://www.bing.com/images/search?q=falcon+50+winglets&id=16029546BA85E4187B69003261A04AC54CEDB66C&FORM=IQFRBA
-
I have come across RAM "T-topology" on Gigabyte Z390 Aorus boards. Q) What difference does this make to the selection of RAM? For a 32GB 3200MHz kit would I be better off with 2x16 or 4x8? Q) What about other Z390 manufacturers? Q) Is T-topology chipset specific?
-
Jim, I doubt you saw my earlier reply, which did not quote you. Anyway, my remaining Q is: If I go to Prepar3D, do I have to relearn all those keystrokes I've used since 1995? Thanks again, Mac6737
-
I bought but have not used there PrecipitFX for v4, Q is it worth installing now within 4.4? Also since there are not going to be any big aliners coming out for some time am thinking of adding there 747 and NG Immersion to my aircraft. Q how nice is there volumetric light FX from the VC because above all the other FX the volumetric lights in fog and clouds would be worth the price to me. So is it worth it? is it that good in practice.
-
Majestic Dash 8 Q-400 Module version 2.6 Majestic Dash 8 LINDA module version 2.6 This update adds a specific preprogrammed configuration default file for the VRInsight Original MCP (config-mcp.default). Installation Notes: Download and unzip it and place the two folders into: */Microsoft Games/Microsoft Flight Simulator X/Modules or similar for P3D Say "yes" if he'd like to overwrite anything In the folder Modules\linda-cfg\aircrafts\Majestic Dash 8 Q-400 you'll find 3 files. They contain MCP Combo default assignments for the Dash8. If you want to use them rename them from *.default to *.LUA I will update this files from time to time and will make a little note in this thread about the changes. Users, who also made changes to this codes could post it in this thread or drop me a PM and we will update the module. Features: All switches are working (most on/off/toggle) except Fire and FDR and all FO-side functions "semi-intelligent" MCP Combo displays: dependend on importance the display will show APU state, GPU state, Conditions Lever, Flaps state, Cabin Temp (Cabin Temp only for MCP Combo2) "switch bundles" for several functions: e.g. all panel lights with one button cold and dark function (from default loading state) no macros needed Version History: 1.0 > 1.1 - changed DC_ALL_Batteries according tutorial - Fixed FORMAT and TERR/WX button funtionality - enabled engine control and autofeather 1.1 > 1.2 - added TOGA 1.2 > 1.3 -some minor changes -added NAV source toggle -added AP_VS_PITCH_DNfast and AP_VS_PITCH_UPfast () -added MIP_SPDBUG_incfast () and MIP_SPDBUG_decfast () -improved ALT and HDG fast functions -added NH indicators during startup for MCP 2 Combo 1.3 > 2.0 Released with PRO Version - HUD - Enhanced door code (open and close) - added GSX refueling (calling refueling truck will open MJC payload program - be sure to add the correct path in the \Prepar3D v3\Modules\linda\aircrafts\Majestic Dash 8 Q-400\actions.lua - at line 63 ) - Clock CHR press 2.0 > 2.1 - fix for LINDA 2.6.6 or later to allow correct operation with FS2Crew voice and VRI Combo MCP panels - Added code to correctly display Landing Gear positions LEDs on Saitek Switch Panel - fix for operation with VRI Combo Airbus FCU panels - Added additional toggle switch functions - inclusion of config-mcp2a.default configuration for VRI Combo Airbus FCU panels 2.1 > 2.2 - corrected minor typo 2.2 > 2.3 - further fixes for correct operation with FS2Crew 1.5 or later and the VRI Combo MCP panels. An issue still exists where the FO repeats the '1000 to Go. ALT SEL' within 1000 ft of the selected altitude; the workaround is to change the target altitude by more than 1500 ft on reaching cruise. - added display of throttle position on VRI Combo MCP panels to allow better coordination with Condition Levers. 2.3 --> 2.4: some fixes added GSX Door function you can disable the GSX door function by uncommenting the function GSX_Door_Service () inside the timer function 2.4 --> 2.5: Adds Q400 specific config-mcp.default for users of the VRInsight MCP1(original). 2.6 added GSX Library function Important! Have a look here!!! Need to download the new GSX library GSX cfg for Dash added. Have a look into the readme inside the GSX folder included in the module link above!
-
Guys pls apologize my stupid Q but I'm new to P3D... I'm too damn stupid to be able to find how to load the Tutorial flight scenarios in P3D v4. I know with FSX I needed to move the files to another directory under my Documents but I'm unable to do the same in V4. It seems that the files have different extensions then those of P3D. I'm expecting the visit of a friend who is eager to test V4 with the NGX on my PC.
-
PMDG 06.January update CTD with FS2Crew enabled
byork replied to Wothan's topic in FS2CREW: PMDG 747-400 QUEEN OF THE SKIES II
You've searched this? https://www.google.com/search?q=NTDLL.DLL+p3d+exit+crash&oq=NTDLL.DLL+p3d+exit+crash&aqs=chrome..69i57.6069j0j7&sourceid=chrome&ie=UTF-8 -
Captain Sim C-130 Liveries
Pro Avia replied to Aharon's topic in The Paint Shop - The Aircraft Painter's Forum - How To
Have you searched at the Captain Sim site? https://www.captainsim.com/cgi-bin/products.pl?action=showliveries;product=c131;page=14;q= Search by Keyword. No idea if the download links are still active. -
Western Global Airlines for Sky Simulations MD-11 V2.0 FSX:SE
HighBypass replied to HighBypass's topic in The Paint Request Forum
Polite bump, but I've added the image via google (not airliners.net). If this is copyrighted then my apologies. If so then can someone perhaps give me an example of a non copyrighted image please? https://www.google.com/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=2ahUKEwic-L_X55rhAhWTuZ4KHbWwAYUQjRx6BAgBEAU&url=https%3A%2F%2Fwww.jetphotos.com%2Fphoto%2F9238150&psig=AOvVaw2lNf1NP4nVq5A4jLn76NuE&ust=1553517880101023 -
Best all round ATC for FSX - Pro- ATC/ X?
Sidney Schwartz replied to forshaw's topic in MS FSX | FSX-SE Forum
Hi Jim. Have you asked them about this? Can you load a standard FSX flight plan into the CS 757? If so, you should be able to tell ProATC-X to save an FSX flight plan when you click "Fly Now", and then load that into the 757. Or if CS uses a proprietary format for flight plans, maybe there's a way to convert them to FSX format. That's what I have to do with the Majestic Q-400. Works like a charm, though. -
John, Boeing still uses a huge and heavy "trim wheel" for mechanical leverage in case the electric trim fails for any reason. The correct procedure in the event of runaway trim control is for someone to put their hand on the wheel, then have the other pilot immediately flip up the guarded cover, and flip the electric trim override switches OFF. The pilot flying can then use the old-fashioned "armstrong" method to put the plane back in trim. http://www.bing.com/videos/search?q=boeing+trim+wheel&&view=detail&mid=B5FC4E981D0FAB9327BDB5FC4E981D0FAB9327BD&&FORM=VRDGAR
-
Saitek yoke freezing during flight
ibrahim280901 replied to sgerfen's topic in Hardware Controllers | Joysticks | Drivers
It has a connection as you wrote. The throttle can only be connected to the yoke. Like this link so it can only connect to the yoke with the default way. https://www.google.com/search?q=ps2-connection&source=lnms&tbm=isch&sa=X&ved=0ahUKEwin58aeiq3gAhXmzaYKHRJfCJwQ_AUIDigB&biw=1920&bih=969#imgrc=5p7rhKRqZyzPXM: "What language". My language? It's danish. -
It's an automatic function. However if need be reference Supplemental Procedures or the Q
-
P3D V4.4 CTD with finishig a flight
byork replied to madwan's topic in FS2CREW: PMDG 747-400 QUEEN OF THE SKIES II
Don't happen to me. I googled it... possible solutions are ensure you're using Windows 10. For some reason Win 10 seems to be better than Win 7 in this regard. Try selecting HS on the FS2Crew Main Panel prior to shutting down if using a headset. And check this out: https://www.google.com/search?newwindow=1&ei=NGKIXLbPCon_wAOnm6-ACg&q=Kernelbase.dll+p3d+exit&oq=Kernelbase.dll+p3d+exit&gs_l=psy-ab.3..33i160.53921.54676..54829...0.0..0.162.665.0j5......0....1..gws-wiz.......0i71j0j0i22i30.IAAA8OGQIhc -
Something new and unique for low and slow flyers..... Wildlife+ autogen birds, animals and sea life has been uploaded to the library, Search for 'Wildlife v2' http://library.avsim.net/search.php?SearchTerm=wildlife%20v2&CatID=root&Go=Search Here's a video preview https://www.youtube.com/watch?v=0xuaqAjhbwg This thread is for Q & A and problem solving. I've had one report of a Simconnect side by side configuration error when starting the exe, so once we've found the resolution to that I'll post it here in case others are suffering the same problem. Cheers Richard
